Siemens SITRANS FUP1010 - Connecting AC Power Adapter;Charger; Figure 2-2 Power Adapter;Ac-Charger for Dual Channel Flow Meter

Installation
2.3 Connecting AC Power Adapter/Charger
FUP1010 IP67 Portable Quick Start
Operating Instructions, 01/2013, CQO:QSG003 Revision 05
11
2.3 Connecting AC Power Adapter/Charger
Connecting the 1015BCK-1 (7ME39404PG00) Power Adapter/Charger
1. Connect the AC power cord to the AC cord input of the Power Adapter/Charger.
2. Plug the Power Adapter/Charger connector into the rear panel Auxiliary Power/Battery
Charger input connector.
3. Plug the Power Adapter/Charger AC plug into an AC power outlet.








① AC Cord Input ⑤ Input/Output Connector
② Connect to Rear Panel Power Input Connector ⑥ RS-232 Port
③ Flow Sensor Channel 2 ⑦ Battery Status Indicator
④ Flow Sensor Channel 1 ⑧ Auxiliary Power/Battery Charger Input
Figure 2-2 Power Adapter/AC-Charger for Dual Channel Flow Meter