Siemens SITRANS FUP1010 - Navigating the Menu

Commissioning
3.2 Navigating the Menu
FUP1010 IP67 Portable Quick Start
14 Operating Instructions, 01/2013, CQO:QSG003 Revision 05
3. Plug charger into an AC outlet. Within 10 seconds of power-up the flow meter main
display will become active and a typical Siemens graphic will briefly appear. The screen
also identifies the software version of the unit.

YHU*
① Software Version (x.xx.xx)
4. Press the <MENU> key and the Main Menu will appear.
6HOHFW0HWHU7\SH
0HWHU7\SH !&KDQQHO)ORZ
0HWHU)DFLOLWLHV 'XDO3DWK)ORZ
/DQJXDJH &K)ORZ
  &K)ORZ
  7KLFNQHVV*DXJH

6LHPHQV&KDQQHO>@&KDQQHO
3.2 Navigating the Menu
Installation Menu Navigation
The Installation Menu Chart is a multi-level structure divided into three columns from left to right
Level A - lists the major menu categories.
Level B - list the menu cells associated with Level A. You can enter data into Level B menu cells that
are display parameters in a column at the right of the screen.
Level C - lists the Level B data
Level B Level C
Recall Site Setup Pump 1
Pump 2
Level A
Channel Enable
Create/Name Site
Site Security
Delete Site Setup
Sa
ve/Rename Site