Siemens SITRANS FUP1010 Quick Start

Introduction
1
1.1 Introduction
Introduction
This Quick Start is for the Siemens FUP1010 Weatherproof IP67 Portable flow meters. It
includes procedures to form and charge the battery pack and use the AC Power Adapter. It
also illustrates a typical set using D-Series transducers in the Reflect operating mode (for
Direct mode see Operation Instructions manual). These procedures can also be applied to
single and multi-channel models as well.
To use the Siemens Si-Ware program to assist in flow meter installation download the
program at [http://s13.me/ns/cv].
Note
Important Safety
Note: For complete Important Safety considerations and Ratings, refer to
the Operation Instructions manual included with the unit.
Note
This Quick
Start Guide applies to the following FUP1010 IP67 (weather proof) operating
systems: Version 3.02.02 and later and version 4.03.00 and later.
1.2 Items supplied
● SITRANS FUS1010 IP65 NEMA 4X & IP66 NEMA 7 Transmitter
● SITRANS F Literature CD
● Quick Start Guide
Note
For additional items refer to your packing slip.
FUP1010 IP67 Portable Quick Start
Operating Instructions, 01/2013, CQO:QSG003 Revision 05
5

Siemens SITRANS FUP1010 Specifications

General

Brand	Siemens
Model	SITRANS FUP1010
Category	Measuring Instruments
Language	English