Commissioning
3.3 Setting the Parameters
FUP1010 IP67 Portable Quick Start
Operating Instructions, 01/2013, CQO:QSG003 Revision 05
21
Sensor Identification
The Sensor part number located on the front face provides a detailed identification. For
example, the
Part Number: 1011PPS-D1
means:
ī
ī
1011PPS - D1
ā Model
ā” Size
Note
Chec
k to make sure that the Sensors are a matched set with the same serial numbers and
marked with an "A" and "B" (e.g., 19256A and 19256B).
Note
Sensor
Model names for Version 3 op systems are as follows: 1011H Hi Precision, 1011
Universal and 991 Universal.
To Next Page
Loading...
