FUP1010 IP67 Installation Menu Chart
LEVEL A LEVEL B LEVEL C LEVEL D LEVEL E LEVEL F
Meter Facilities Preferred Units English/Metric
Table Setups Pipe Table Create/Edit Pipe Enter From List
Delete Pipe Enter From List
Sensor Type Enter From List
Logger Control Display Logger Enter From list
Output Logger Yes/No
Circular Memory Yes/No
Est LogTime Left View Only
Clear Logger Yes/No
Memory Control Log Memory Left View Only
Memory Map Yes/No
Defragment Yes/No
Analog Out Trim Trim Io1 / Io2 Operate / Trim @ 4mA
Trim Vo1 / Vo2 Operate / Trim @ 2V
Trim Pgen1 / Pgen2 Operate / Trim @ 1 kHz
RTD Calibrate RTD 1 / RTD 2 Factory / User Cal
Clock Set Date (MM.DD.YY) Edit Date
Time ((HH.MM) Edit Time
RS-232 Setup Baud Rate Enter From List
Parity Enter From List
Data Bits 7/8
Line Feed Yes/No
Network ID Numeric Entry
RTS Key Time Enter From List
Backlight Enter from List
System Info Version View Only
Battery Capacity View Only
Reset Data/Time View Only mm.dd.yy hh.mm.ss
Op System P/N View Only
Checksum View Only
Code View Only
System Time View Only mm.dd.yy hh.mm.ss
Language Enter From list
To Next Page
Loading...
