6 OPERATION
58
SITRANS FX330
www.siemens.com/flow 08/2022 - A5E36751269-AG EN
6.2 Basic principles of operation
6.2.1 Functional description of the keys
6.2.2 Switch from measuring mode to menu mode
Use the ↲ button to exit menu mode and return to measuring mode.
6.2.3 Change the settings in the menu
Press the → button to enter the menu.
Use the ↲
button to exit menu mode and return to measuring mode.
• Use the ↲ and ↑ or ↓ keys to navigate in the menu.
The current values or settings are displayed.
Save the new value or setting using the ↲ key.
• Some menu items contain several setting options. They are displayed in sequence by pressing
the ↲ key.
• Press the ↲ button to save the settings,
or to reject them.
• Before returning to measuring mode, you are prompted "Save Configuration?" which you need
to accept with "Yes".
Switch between "Yes",
"Back" and "No" by pressing the ↑ or ↓ keys.
INFORMATION!
•
It is recommended to activate the push buttons perpendicular to the front. Touching them
from the side can cause incorrect operation.
•
The mechanical keys and keys for the bar magnet have the same functionality.
→
Switch from measuring mode to menu mode
Switch to one menu level lower
Open menu item and activate change mode
In change mode: Move the input cursor one position to the right; after the last digit
the input cursor jumps back to the beginning.
↑ or ↓
Change between the menu items within a menu level
In measuring mode: Switch between 1. measurement page, 2. measurement page
and status message.
In change mode: Changing parameters and settings; running through the available
characters; shifting the decimal point to the right or left.
↲
Confirm settings and changes
Return to measuring mode
Table 6-2: Description of the operating keys
Measuring mode Operation Menu mode
156.3 kg/h
→
> Quick Setup
Table 6-3: Switch from measuring mode to menu mode
To Next Page
Loading...
