Siemens SITRANS FX330 - Start-up; Start-up screen; Operation

5 START-UP
54
SITRANS FX330
www.siemens.com/flow 08/2022 - A5E36751269-AG EN
5.1 Start-up screen
After finishing of the self-test the device switches to the measuring mode. Here, all of the
parameters preset for the customer are analysed and checked for plausibility, and the currently
measured value is displayed.
5.2 Operation
INFORMATION!
After connection to power supply the device carries out a self-test. After 10 seconds the
following start-up screen appears:
Figure 5-1: Start-up screen
INFORMATION!
The measuring device is largely maintenance-free.
Observe the application limits in respect of temperature and medium.