Siemens SITRANS FX330 - Service; Replacing signal converter; LC display

SERVICE 7
99
SITRANS FX330
www.siemens.com/flow08/2022 - A5E36751269-AG EN
7.1 Replacing signal converter / LC display
The signal converter has to be replaced by a signal converter with a compatible CG number ⑦ .
To be compatible, the CG number must be identical except for the seventh digit. The seventh
di
git can vary depending on the language package.
For example: CG2000x200
x = 1 Full language package according to table on page 62.
x = 2 European language package: English, German, French, Italian, Spanish, Swedish, Czech,
Polish, Turkish, Slovenian
x = R Chinese language package: Chinese, English, German, French
x = S Russian language package: Russian, English, German, French
Table 7-1: Possible language packages
Figure 7-1: Connect the transmitter module
1 Connector for LC display
2
Service connector
3
SIL connector
4
Display brackets
5 Connection to the flow sensor
6 Fixing screw
7
CG number