Siemens SITRANS FX330 - Overview of the most important functions and units; Menu languages

6 OPERATION
62
SITRANS FX330
www.siemens.com/flow 08/2022 - A5E36751269-AG EN
Reset passwords
In case the user has changed particular passwords from their default settings and is not able to
lo
g in anymore, there is a "Reset Passwords" command available in the C6.2.3 submenu.
However to prevent unauthorised use this command itself is protected by a non-changeable
un
ique password available by contacting the manufacturer.
6.3 Overview of the most important functions and units
Menu structure
• "A Quick Setup": Quick check and setup of the signal converter, including application
assistants
• "B Test": Simulation functions and display of the actual measurement values for all variables
• "C Setup": Complete setup possibilities
6.4 Menu languages
INFORMATION!
A complete list of all functions and short descriptions is provided in the next section. All default
pa
rameters and settings are adapted for the customer.
Menu Explanation
A1 Language or C5.1 Language Select the menu language (for details refer to following chapter)
B1.2 Current Output Check the current output
B1.3.1 Pulse Output Check the pulse output
B1.3.2 Frequency Output Check the frequency output
B1.3.3 Status/Limit Output Check the status output
C1.8 Time Constant Time constant, damping value
C2.1.2 0% Range Minimum flow rate (current output)
The set value represents the 4 mA value of the current output.
Us
ually 0% of flow is set as 4 mA, but it is also possible to assign
higher flow values to 4 mA.
C2.1.3 100% Range Maximum flow rate (current output)
The set value represents the 20 mA value of the current output.
Usually 100% of flow is set as 20 mA, but it is also possible to
assign lower flow values to 20 mA.
Table 6-8: Most important functions
English German French Italian Spanish
Swedish Danish Czech Polish Russian
Chinese Turkish Slovenian
Table 6-9: List of menu languages for devices with 4...20 mA/HART
®
communication (availability depending on
electronic revision and language package)
English German French
Table 6-10: List of menu languages for devices with Profibus PA or Foundation Fieldbus communication