Siemens SITRANS LUT400 - Pump Control

A5E33701270 COMMUNICATIONS FOR SITRANS LUT400 (HART) – MANUAL Page 101
mmmmm
Operation - FC375
2 Calibration
1 Low Calib. Pt.
2 High Calib. Pt.
3 Sensor Offset
4 Near Range
5 Far Range
3 Rate
1 Fill Rate per Minute
2 Empty Rate per Mi...
3 Damping Filter
4 Fail-Safe
1 Material Level
2 LOE Timer
3 Fail-Safe mA Value
5 Current Output
1 Current Output Func.
2 Start Scale (=4 mA)
3 Full Scale (=20 mA)
4 Minimum mA Limit
5 Maximum mA Limit
6 Volume
1 Vessel Shape
2 Volume Units
3 Maximum Volume
4 Vessel Dimension A
5 Vessel Dimension L
6 User Defined Unit
7 Pumps
1 Basic Setup
1 Pump Control Enable
2 Relay Pump 1
3 Relay Pump 2
4 Pump Control Mode
5 ON Setpoint Pump 1
6 OFF Setpoint Pump 1
7 ON Setpoint Pump 2
8 OFF Setpoint Pump 2
9 Serv Ratio Pump 1
Serv Ratio Pump 2
2 Modifiers
1 Wall Cling Reduction
1 Enable
2 Level Setpoint Vari...