Page 50 COMMUNICATIONS FOR SITRANS LUT400 (HART) – MANUAL A5E33701270
mmmmm
Operation - AMS
Electronic Device Description (EDD)
SITRANS LUT400 requires the EDD for AMS Device Manager version 10.5.
You can locate the EDD in Device Catalog, under Sensors/Level/Echo/Siemens/SITRANS
LUT400. Check the product page of our website at www.siemens.com/sitransLUT400
, under
Support->Software Downloads, to make sure you have the latest version of the EDD for
AMS Device Manager. If you need to install a new EDD, see
Configuring a new device
below.
Configuring a new device
1) Check that you have the most recent EDD, and if necessary download it from the
product page listed above. Save the files to your computer, and extract the zipped
file to an easily accessed location.
2) Launch AMS Device Manager– Add Device Type, browse to the unzipped DD file,
and select it.
Startup
1. Launch AMS Device Manager.
(Application Guides for setting up HART devices with AMS Device Manager can be
downloaded from product page of our website at www.siemens.com/sitransLUT400
.)
TVT Setup 72 Screen out false echoes
Process Variables View 76 Monitor process variables and level trend
Security 74
Protect security and communication parameters
from modification by the maintenance user
Note: Italian, Portuguese and Russian are not supported in AMS Device
Manager for SITRANS LUT400. If the device is set to one of these languages, it
may be necessary to switch the device to English, German, French, Spanish or
Chinese.
Feature (cont’d) page Function
To Next Page
Loading...
