A5E33701270 COMMUNICATIONS FOR SITRANS LUT400 (HART) – MANUAL Page 5
mmmmm
Operation - PDM
Operation via SIMATIC PDM 6 (HART)
(SITRANS LUT400 compatible with PDM version 6.1)
Features
SIMATIC PDM is a software package used to commission and maintain SITRANS LUT400 and
other process devices. Please consult the LUT400 online help for details on using SIMATIC
PDM. (More information can be found at www.siemens.com/simatic-pdm
.)
SIMATIC PDM monitors the process values, alarms and status signals of the device. It allows
you to display, compare, adjust, verify, and simulate process device data; also to set schedules
for calibration and maintenance.
Functions
Parameters are identified by name and organized into function groups. The menu
structure for SIMATIC PDM is almost identical to that of the SITRANS LUT400 LCD. See
LCD Menu Structure
in LUT400 operating instructions
1
for a complete list of parameters
in chart format.
For a list of parameters that do not appear in the menu structure and are accessed via pull-
down menus in SIMATIC PDM see page 26. See also
Changing parameter settings using
SIMATIC PDM
on page 24 for more details.
Notes:
• For a complete list of parameters, see
Parameter reference (LUI)
in LUT400
operating instructions
1
.
• While the device is in PROGRAM MODE, the output remains active and
continues to respond to changes in the device.
1.
SITRANS LUT400 (HART) Operating Instructions (7ML19985MV01)
Feature page Function
Quick Start (Level) 9 Device configuration for simple level applications
Quick Start (Volume) 12
Device configuration for simple volume
applications
Quick Start (Volume - Linearization)
15
Device configuration for volume applications
using complex vessel shapes
Quick Start (Flow) 19 Device configuration for simple flow applications
Pump Control Wizard 22 Pump control setup
Echo Profile Utilities 27 Echo profile viewing/comparison
To Next Page
Loading...
