Siemens SITRANS LUT400 - Quick Start Wizards

A5E33701270 COMMUNICATIONS FOR SITRANS LUT400 (HART) – MANUAL Page 55
mmmmm
Operation - AMS
Wizard - Quick Start (Level)
Step 1 – Identification
1. Navigate to Configure/Setup > Wizard > Wizard - Quick Start (Level).
2. You can accept the default values without modification. (TAG, Long TAG< Descriptor,
Message, and Date fields can be left blank.) If desired, make changes then click on
Next.
Step 2 – Application
1. Select the Siemens transducer connected to the device.
2. Select the Application Type (Level, Space, Distance
1
).
3. Select the Temperature Source, and if fixed, enter a Fixed Temperature value.
4. Click on Next.
1.
For details see parameter 2.1.3.Sensor Mode in SITRANS LUT400 (HART) Operating
Instructions (7ML19985MV01).