A5E33701270 COMMUNICATIONS FOR SITRANS LUT400 (HART) – MANUAL Page 1
mmmmm
COMMS LUT400
Introduction
Overview
The SITRANS LUT400 ultrasonic controller may be operated via remote communications,
using various PC software such as:
• SIMATIC PDM
• Web Browser Interface (used with Web Server Abyss - provided for your
convenience)
• AMS Device Manager
• Field Communicator 375/475 (FC375/FC475) (HART)
• A Field Device Tool (FDT), such as PACTware or Fieldcare
Please consult the appropriate manufacturer’s operating instructions for general details
on how to operate each software package.
Safety Notes
Special attention must be paid to warnings and notes highlighted from the rest of the text
by grey boxes.
The Manual
This manual provides information on the use of SITRANS LUT400 with various remote
communications software packages noted above. The manual is designed to help you get
the most out of your ultrasonic device when used in conjunction with a remote
communications tool. It provides information for the various tools in the following areas:
• Features and Functions
• Installation, Startup, and Configuration of the SITRANS LUT400
• Quick Start Wizards and Pump Control Wizards
• Changing parameters
• Parameter menus
This manual should be used in conjunction with the SITRANS LUT400 (HART) Operating
Instructions (7ML19985MV01)
1
to help you set up your device via remote communications
for optimum performance. We always welcome suggestions and comments about
manual content, design, and accessibility. Please direct your comments to
techpubs.smpi@siemens.com
.
For other Siemens level measurement manuals, go to:
www.siemens.com/level
, and look under Level Measurement.
Note: means important information about the product or that part of the operating
manual.
1.
See DVD shipped with device or download manual from product page of our
website: Go to www.siemens.com/sitransLUT400 > Technical Info > Manuals/
Operating instructions.
To Next Page
Loading...
