A5E33701270 COMMUNICATIONS FOR SITRANS LUT400 (HART) – MANUAL Page 71
mmmmm
Operation - AMS
Level
• Enable and configure level alarms
Alarms
• Enable and configure non-level alarms, such as temperature, switch (DI),
fail-safe, and time to spill
Flowrate
• Enable and configure flowrate alarms
Navigate to Configure/Setup > Setup for access to:
Discrete Inputs
• Enable and configure backup level override, DI logic, and pump interlock
Data Logging
• Configure data logging for PVs, alarms, and flow
Other Control
• Set other controls, such as elapsed time and time of day relays, external
totalizers and samplers
Signal Processing
Navigate to Configure/Setup > Setup > Signal Processing for access to:
Temperature and Velocity
• Configure echo processing by selecting temperature and velocity
Echo Select
• Configure echo processing by selecting algorithm, thresholds, filters, and
submergence detection
Echo Profile
• Measure to display current echo profile, using standard or detailed profile
resolution, as well as view previous profiles
• To view a previous profile, click the drop-down arrow on the Time field and
select the desired profile (note: available only using AMS version 10.1).
To Next Page
Loading...
