Siemens SITRANS LUT400 - Page 107

A5E33701270 COMMUNICATIONS FOR SITRANS LUT400 (HART) – MANUAL Page 103
mmmmm
Operation - FC375
4 Out-of-Bounds Level Alarm
1 Enable
2 High Level Value
3 Low Level Value
4 Assigned Relay
5 Alarm State
2 Alarms
1 Low Temperature Alarm
1 Enable
2 Low Temp. Value On
3 Low Temp. Value Off
4 Assigned Relay
5 Alarm State
2 High Temperature Alarm
1 Enable
2 High Temp. Value...
3 High Temp. Value...
4 Assigned Relay
5 Alarm State
3 Switch (DI) Alarm
1 Enable
2 Discrete Input Num...
3 Discrete Input State
4 Assigned Relay
5 Alarm State
4 Fail-safe Fault Alarm
1 Enable
2 Assigned Relay
3 Alarm State
5 Relay Logic
1 Relay 1 Logic
2 Relay 2 Logic
3 Relay 3 Logic
6 Time to Spill
1 Level to Spill
2 Minutes Left to Spill
3 Flowrate
1 High Flowrate Alarm
1 Enable
2 High Flowrate Valu...
3 High Flowrate Valu...
4 Assigned Relay
5 Alarm State
2 Low Flowrate Alarm
1 Enable
2 Low Flowrate Valu...
3 Low Flowrate Valu...
4 Assigned Relay
5 Alarm State
9 Discrete Inputs
1 Backup Level Override
1 Enable
2 Level Override Value
3 Discrete Input Num...