Siemens SITRANS LUT400 - Page 115

A5E33701270 COMMUNICATIONS FOR SITRANS LUT400 (HART) – MANUAL Page 111
mmmmm
Operation - FC375
7 Step 3 of 4: Pump Setpoints
1 ON Setpoint Pump 1
2 OFF Setpoint Pump 1
3 ON Setpoint Pump 2
4 OFF Setpoint Pump 2
5
6 ==================
7 Step 4 of 4: Summary
1 Pump Control Enable
2 Relay Pump 1
3 Relay Pump 2
4 -----------------
5 Pump Control Mode
6 Serv Ratio Pump 1
7 Serv Ratio Pump 2
8 ------------------
9 ON Setpoint Pump 1
OFF Setpoint Pump 1
ON Setpoint Pump 2
OFF Setpoint Pump 2
===============
HOME to finish wiza...
3 Operation
1 Select Analog Output
2 Auto Zero Head
1 Zero Head Offset
2 Head
3 Actual Head Value
3 Auto Sensor Offset
1 Sensor Offset
2 Distance
3 Desired Distance fo...
4 Auto Sound Velocity
1 Sound Veloc at 20 C
2 Distance
3 Desired Distance fo...
5 Loop-Test
6 Master Reset
1 Yes
2 No
7 Reset Min/Max Temp.
8 OCM Flow Totalizers
1 Reset Daily Totalizer
2 Reset Running Totalizer
9 Pumped Volume Totalizer
1 Reset Running Totalizer
Configuration Flag Reset
1 Yes
2 No