Siemens SITRANS LUT400 - Page 126

Page 122 COMMUNICATIONS FOR SITRANS LUT400 (HART) – MANUAL A5E33701270
mmmmm
Operation - FC375
Sensor Mode
Current Output Func.
Start Scale (=4 mA)
Full Scale (=20 mA)
==============
HOME to finish wiza.
2 Wizard - Pump Control...
1 Step 1 of 4: Application
1 Pump Control Enable
2
3 Relay Pump 1
4 Relay Pump 2
5
6 ===============
7 Step 2 of 4: Vessel Regime
1 Pump Control Mode
2 Serv Ratio Pump 1
3 Serv Ratio Pump 2
4
5
6 ================
7 Step 3 of 4: Pump Setpoints
1 ON Setpoint Pump 1
2 OFF Setpoint Pump 1
3 ON Setpoint Pump 2
4 OFF Setpoint Pump 2
5
6 ==================
7 Step 4 of 4: Summary
1 Pump Control Enable
2 Relay Pump 1
3 Relay Pump 2
4 -----------------
5 Pump Control Mode
6 Serv Ratio Pump 1
7 Serv Ratio Pump 2
8 ------------------
9 ON Setpoint Pump 1
OFF Setpoint Pump 1
ON Setpoint Pump 2
OFF Setpoint Pump 2
===============
HOME to finish wiza...
3 Operation
1 Select Analog Output
2 Auto Zero Head
1 Zero Head Offset
2 Head
3 Actual Head Value
3 Auto Sensor Offset
1 Sensor Offset
2 Distance
3 Desired Distance fo...