A5E33701270 COMMUNICATIONS FOR SITRANS LUT400 (HART) – MANUAL Page 13
mmmmm
Operation - PDM
2. Select the Temperature Source (Transducer, Fixed Temperature, External TS-3,
Average of Transducer and TS-3), and if Fixed, enter the Fixed Temperature value.
3. Click on Next.
Step 3 - Vessel Shape
The vessel shapes shown
are predefined.
To describe a more
complex shape see
Quick
Start (Volume -
Linearization)
on page 15.
1. Select a Vessel
Shape for your Volume application.
2. Click on Next.
To Next Page
Loading...
