Siemens SITRANS LUT400 - Page 89

A5E33701270 COMMUNICATIONS FOR SITRANS LUT400 (HART) – MANUAL Page 85
mmmmm
Operation - AMS
Sensor (tab)
Long TAG 3.1.2
U ni ts 2 .1.1
Sensor Mode
Sensor Mode Secondary
Transducer 2.1.6
Frequency 2.1.7
Long Shot Duration 2.1.8
Short Shot Duration 2.1.9
Calibration (tab)
Long TAG 3.1.2
Low Calibration Point 2.2.1
High Calibration Point 2.2.2
Sensor Offset 2.2.3
Near Range 2.2.4
Far Range 2.2.5
Rate (tab)
Long TAG 3.1.2
Fill Rate per Minute 2.3.1
Empty Rate per Minute 2.3.2
Damping Filter 2.3.3
Fail-Safe (tab)
Long TAG 3.1.2
Material Level 2.4.1
LOE Timer 2.4.2
Fail-Safe mA Value 2.4.3
Current Output (tab)
Long TAG 3.1.2
Current Output Function
Start of Scale (=4 mA)
Full Scale (=20 mA) 2.5.4
Minimum mA Limit 2.5.5
Maximum mA Limit 2.5.6
Volume (tab)
Long TAG 3.1.2
Vessel Shape 2.6.1
Volume Units 2.6.2
Maximum Volume 2.6.3
Vessel Dimension A 2.6.4
Vessel Dimension L 2.6.5
User Defined Unit 2.6.6
Linearization
Configure/Setup Function Group (cont’d)
parameter
number