Siemens SITRANS TSinsert Compact Operating Instructions

Safety notes
2.2 Improper device modifications
TS100/TS200/TS300/TS500/TSinsert/TSthermowell
12 Compact Operating Instructions, 01/2018, A5E03920348-AE
In critical applications, a thermowell stress calculation is recommended:
● ASME PTC 19.3-TW2016
● Dittrich/Klotter-method engineering service
2.1.2
Conformity with European directives
The CE marking on the device symbolizes the conformity with the following European
directives:
Electromagnetic compatibi
l-
i
ty EMC
2014/30/EU
Directive of the European Parliament and of the Council on the
approximation of the laws of the Member States relating to elec-
tromagnetic compatibility and repealing Directive 89/336/EEC.
Atmosphère explosible
ATEX
2014/34/EU
Directive of the European Pa
rliament and the Council on the
approximation of the laws of the Member States concerning
equipment and protective systems intended for use in pote
ntial-
ly explosive atmospheres.
The applicable directives can be found in the EC conformity declaration of the specific
device.
See also
Certificates (Page 107)
2.2
Improper device modifications
WARNING
Improper device modifications
Risk to personnel, system and environment can result from modifications to the device,
particularly in hazardous areas.
• Only carry out modifications that are described in the instructions for the device. Failure
to observe this requirement cancels the manufacturer's warranty and the product
approvals.

Siemens SITRANS TSinsert Specifications

General

Brand	Siemens
Model	SITRANS TSinsert
Category	Temperature Controller
Language	English