Siemens Synova FC330A - Page 12

e1973c-2
02.2004
8
Fire & Security Products
Siemens Building Technologies Group
SELECT: 1. ENabling
(main menu) 2. DISabling
3. INFO polling
4. other functions
FUNCTIONS: 1. function
(4) 2. system TEST
3. printout
4. configuration
CONFIGURATION: 1. user functions
(4.4) 2. user text
3. service functions
4. erase functions
direct setting user parameters
direct definition user texts
Level SERVICE FUNCTIONS
> enter password?
hm: back to menu Stop: end operating
ERASE data: 1. ERASE alarm counter
(4.4.4) 2. ERASE event memory
3. ERASE conf + sys data
4. ERASE element status
(locked with switch ’S2’)
(not locked)
to erase ’non−alarm’ events
SERVICE 1. addr. line −> CONNECT
level : 2. addr. line −> DISCON.
(4.4.3) 3. test AI−LED’s ON/OFF
4. reconfigure addr. lines
connect addressable loop
disconnect addressable loop
for TEST LEDs
to reconfigure addr. lines
5. horn/ctrl/RT −> OFF
6. TEST−alarm −> HORN
7. Visualizer ON/OFF
8. re−parametrise LON
to activate horn briefly with each det.
TEST alarm
enable / disable ’visualizer’
to start automatic configuration of LON-
Bus
Level SERVICE FUNCTIONS
> enter password?
hm: back to menu Stop: end operating
only for specialized personell
only for service
engineer
for COMMON disabling