Siemens Synova FC330A - About this Operation Manual

e1973c-1
02.2004
2
Fire & Security Products
Siemens Building Technologies Group
About this operation manual
How to use this operation manual
This operation manual describes the use and the operation of the control console FC330A. It
contains all information for the normal user with access level 2 who has to react to alarms, disa-
ble and enable parts of the system, etc.
This document contains the following:
Chapter
Contents Page
Introduction − General information about this operation ma-
nual
− How to use this manual
1
Fundamentals Fundamental information on the console:
− Description of the control console, functions of
the keys
− Description of the floor panels, functions of the
keys
− Overview of the menu structure
− Fundamental operation of the console
− What is normal operation
− How to get access for operation
− Manned and unmanned operation
3
Alarm − Organisation of the SPECIAL Alarm Concept
− How to read an alarm message
− How to react in an alarm situation
15
Disable/Enable System Parts − Temporary isolation of a detector zone/single
detectors, i. e. for repair works
− Disabling/Enabling remote transmission
− Disabling/Enabling alarm devices
21
Faults − How to react to a fault message
− Remedies by the user
31
Maintenance Maintenance works carried out by the user e.g.:
− Testing detectors
− Testing lamps, batteries, alarm devices, re-
mote transmission
33
Other functions − Disabling/Enabling the printer, paper replace-
ment
− Printing information
− Polling information, i. e. alarm counter, event
memory, user texts, system status, configura-
tion data
− Setting time and date
43
How to read this operation manual
This operation manual uses several symbols to guide the user through the manual.
The meanings in detail are:
1. Multi step actions are marked with numbers.
"
Single step actions are marked with a triangle.
 The result of an action is marked with an arrow.
In body text you will find quotations like display texts, keys or LED−fields or LEDS.
Frequently used keys are shown as they look like on the console, e.g.
ok
.