Siemens Synova FC330A - Poll Configuration Data

e1973c-14
02.2004
50
Fire & Security Products
Siemens Building Technologies Group
Poll configuration data
Purpose
The polling of configuration data is only relevant for the service engineer, for controlling user
functions without the configuration tool.
Polling configuration data of detector zones
1. Press
St
.
 Display shows 
2. Select option 3.  4.  1.
 Display shows 
3. Enter the desired zone number or 555
to select all zones and press
ok
.
 Display shows 
4. Press
ok
to select only a single zone or
enter the number of the last zone of the
desired range and press
ok
.
 Display shows 
5. Use and to scroll through the
configuration data of each selected
zone.
 Display shows 
6. Use
hm
to go back to the submenu or
St
to terminate the configuration data polling.
Polling configuration data of address lines
1. Press
St
.
 Display shows 
2. Select option 3.  4.  2.
 Display shows 
3. Enter the desired line number or 555 to
select all lines and press
ok
.
 Display shows 
4. Press
ok
to select only a single line or
enter the number of the last line of the
desired range and press
ok
.
 Display shows 
5. Use and to scroll through the
configuration data of each device of the
selected line.
 Display shows 
6. Use
hm
to go back to the submenu or
St
to terminate the configuration data polling.
SELECT: 1. ENabling
(main menu) 2. DISabling
3. INFO polling
4. other functions
Select ZONES: (range ### to ###)
Enter ZONE no.? (555 = all)
ZONE information for ### ZONES/ELEM:
↓: forward ↑: backwards
hm: back to menu Stop: end operating
ZONE ### selected. ok = single ZONE
Second ZONE No.? (range ### − ###)
Zn ###:###### tst:######dis:######## el
ele ## name=###### type=######
al=###### incr=###### dr=######
trouble=###### ln ## dev ##
SELECT: 1. ENabling
(main menu) 2. DISabling
3. INFO polling
4. other functions
Select LINES: (range ## to ##)
Enter line no.? (555 = all)
LINE information for ## LINES:
↓: forward ↑: backwards
hm: back to menu Stop: end operating
LINE ## selected. ok = single line
Second line no.? (range ## − ##)
line ###: ######, ### devices
device ### name=###### type=######
al=###### incr=###### dr=######
trouble=###### zn ### el ##