e1973c-13
02.2004
44
Fire & Security Products
Siemens Building Technologies Group
Printer disabling/enabling
i
Printer connected: Yes No
When has the printer to be disabled?
Under normal conditions the printer operates in active stand-by. It is only disabled in special ca-
ses e. g. for change of paper or repair.
Disabling the printer
1. Press
St
.
Display shows
2. Select option 2. 3. 3. (to disable
the printing of all messages)
Display shows
for a few seconds
The printer is disabled.
The yellow LED of the display field Isolation is on.
Enabling the printer
1. Press
St
.
Display shows
2. Select option 1. 3. 1.
Display shows
for a few seconds
The printer is enabled.
The yellow LED of the display field Isolation is off, if no other parts of the system are isola-
ted.
SELECT: 1. ENabling
(main menu) 2. DISabling
3. INFO polling
4. other functions
printer DISABLED
timeout /hm: menu Stop: end operating
SELECT: 1. ENabling
(main menu) 2. DISabling
3. INFO polling
4. other functions
printer ACTIVE: log ALL messages
timeout /hm: menu Stop: end operating
To Next Page
Loading...
