Siemens Synova FC330A - Fundamental Operation

e1973c-2
02.2004
9
Fire & Security Products
Siemens Building Technologies Group
Fundamental operation
How to operate the control console
To choose a menu item in the display of the console:
1. Press
St
.
 Display shows 
2. Enter the password and press
ok
.
 Display shows 
3. Select the menu item with the and
keys and press
ok
.
or
"
Enter the number of the menu option on the numeric keypad (e. g. option 2.).
 Display shows 
4. Repeat the selection until the required
menu is displayed.
5. Follow the instructions on the display.
6. Finish the operation by pressing
St
.
or
"
Press
hm
to return to the previous menu.
Example
The following description is an example for choosing the Disable elements menu.
1. Press
St
.
2. Log in.
 Display shows 
3. Select option 2. with the and keys
and press
ok
.
or
"
Enter “2”.
 Display shows 
4. Select option 1. with the and keys
and press
ok
.
or
"
Enter “1”.
 Display shows 
5. Select option 2. with the and keys
and press
ok
.
or
"
Enter “2”.
 Display shows 
Actions in the operation manual
In this operation manual, selecting a menu item will be described from now on in a short form as
follows:
"
Select option 2.  1.  2.
 Display shows 
START system operating
> enter password?
hm /Stop: end operating
Access level + page 11
SELECT: 1. ENabling
(main menu) 2. DISabling
3. INFO polling
4. other functions
DISabling: 1. detector/ConTrol ZONES
(2) 2. horn/RT/alarm contacts
3. printer
SELECT: 1. ENabling
(main menu) 2. DISabling
3. INFO polling
4. other functions
DISabling: 1. detector/ConTrol ZONES
(2) 2. horn/RT/alarm contacts
3. printer
DISabling: 1. detector ’zone’
(2.1) 2. detector ’element’
3. ConTrol ’zone’
4. All Fire Ctrl ’zones’
DISABLE element:
> zone no.? (range ### − ###)
hm: back to menu Stop: end operating
DISABLE element:
> zone no.? (range ### − ###)
hm: back to menu Stop: end operating