Siemens Synova FC330A - Normal Operation

e1973c-2
02.2004
10
Fire & Security Products
Siemens Building Technologies Group
Normal operation
What is “normal operation”?
 The system is ready to receive danger messages (alarm) from the detectors.
 No fault messages are pending.
 The green LED in the display field System on  is on.
 The illumination of the text display  may be turned off, but turns on as soon as any key is
pressed or an alarm, fault or status is issued.
 Display shows 
Mains interruption
In case of a mains interruption the fire detection system is powered by an internal battery. No
fault message is issued in the text display and the normal operation will continue , until a preset
default time is expired
When the system is powered by the internal battery the green LED in the display field System on
 is blinking.
ALARM
System on
Fault
Isolation
Detector
test mode
FC330A
Remote alarm
fault / off
Alarm horn
fault / off
System fault
Remote alarm
active
Alarm delay
off
Premises
manned
hm
0
del
789
456
12
3
F1
F2
ok
Start/
Stop
Reset
Acknowledge
1
2
Silence/resound horn
NORMAL OPERATION
WED 21.7.99 15:00
NORMAL OPERATION
WED
21.7.99 15:00
The delay is min
Standard default: 10 min