Siemens Synova FC330A - Control Console Layout

e1973c-2
02.2004
4
Fire & Security Products
Siemens Building Technologies Group
Control console layout
Control console FC330A
ALARM
System on
Fault
Isolation
Detector
test mode
FC330A
Remote alarm
fault / off
Alarm horn
fault / off
System fault
Remote alarm
active
Alarm delay
off
Premises
manned
hm
0
del
789
456
12
3
F1
F2
ok
Start/
Stop
Reset
Acknowledge
1
2
3
4
5
6
7
8
Silence/resound horn
9
NORMAL OPERATION
MON 04.01.99 09:13

ALARM LED bar Red LED’s blinking when an alarm signal is pending.
 Text display Displays selection menus as well as alarm and fault messages.
 Scroll key Allows scrolling of alarm messages in the text display.
 Acknowledge key Confirms an alarm or a message (2 variants possible).
 Variant 1:
1
st
activation
 Alarm horns and buzzer
off
2
nd
activation
 Reactivation alarm horns
 Variant 2:
1
st
activation
 Buzzer off
2
nd
activation
 Alarm horns off
3
rd
activation
 Reactivation alarm horns
 Reset key Resets alarm and fault messages.
Display fields Indicates the operating state by an LED.
Command fields Possess a button to change the operating mode and may have an
LED to indicate the operating state.

Alarm delay off Cancels alarm delay. Remote alarm is given immediately.
 Premises manned
key
Toggles between “manned” and “unmanned” operating mode.

Function keypad Keys for menu−orientated operation and password input.
St
Start/Stop key Open and close menus.
F1 F2
Function keys Usage depends on context.
ok
Execution key Starts the selected menu function.
Move up/down key Selects menu items upwards/downwards.
hm
Home key Returns to the previous menu.
del
Delete key Deletes the character left of the cursor.

Keylock switch Gives access to user operating level 2 without password. Only
when keylock switch is installed.