e1973c-2
02.2004
12
Fire & Security Products
Siemens Building Technologies Group
Operating access via password
The passwords are defined and released to the operators by the service engineer.
In case of misskeying the password, use
del
to cancel keying errors.
Log in
1. Press
St
.
Display shows
2. Enter the password and press
ok
.
Display shows
3. Proceed operating (access is now provided)
Log out
There is no log out procedure, because the operating access expires automatically if no key is
pressed within a certain time (page 11, Automatic timeout).
START system operating
> enter password?
hm /Stop: end operating
SELECT: 1. ENabling
(main menu) 2. DISabling
3. INFO polling
4. other functions
To Next Page
Loading...
