SIGLENT
158 SDG2000X User Manual
4 Troubleshooting
4.1 General Inspecting
After receiving a new SDG2000X Series Function/Arbitrary Generator please
inspect the instrument as followed:
1. Inspect the shipping container for damage.
Keep the damaged shipping container or cushioning material until the
contents of the shipment have been checked for completeness and the
instrument has been checked mechanically and electrically.
2. Inspect the entire instrument.
In case there is any mechanical damage or defect, or the instrument does not
operate properly or fails in the performance tests, notify the SIGLENT sales
representative.
If the shipping container is damaged, or the cushioning materials show signs
of stress, notify the carrier as well as the SIGLENT sales department. Keep
the shipping materials for carrier’s inspection.
3. Check the accessories.
Accessories supplied with the instrument are listed in “Appendix A”. If the
contents are incomplete or damaged, notify the SIGLENT sales
representative.
To Next Page
Loading...
