SIGLENT
SDG2000X User Manual 159
4.2 Troubleshooting
1. After the generator is powered on, if the screen remains dark please
do as the following steps:
(1) Check the power cable’s connection.
(2) Ensure the power switch is turned on.
(3) After the inspections above, restart the generator.
(4) If the generator still doesn’t work after checking, please contact SIGLENT.
2. If there is no waveform output after setting the parameters, please do
as the following steps:
(1) Check whether the BNC cable has a good connection to the output port.
(2) Check whether the output keys have been turned on.
(3) If the generator still doesn’t work after checking, please contact SIGLENT.
To Next Page
Loading...
