SIGLENT UM0202X-E02C - Page 72

SIGLENT
60 SDG2000X User Manual
Noise
Arb
PM Freq
Set the modulating waveform frequency. Frequency
range: 1mHz~1MHz.
To Set Phase Deviation
Press Phase Dev to highlight the parameter, and then use the numeric
keyboard or arrow keys and knob to input the desired value.
 Use the numeric keyboard or arrow keys and knob to input the desired
value.
 The range of phase deviation is from 0° to 360° and the default value is
100°.
Note:
The methods of setting other parameters of PM are similar to AM.