Sigma dp3 Quattro - Changing Slideshow Settings

113
CHANGING SLIDESHOW SETTINGS
Select the [Slideshow Settings] in
Slideshow Menu and then press the or
button to open the setting display.
SLIDESHOW SETTING MENU
Duration
2 sec.
5 sec.
10 sec.
Set the length of time that each image in a
slideshow is displayed.
Repeat
No
Yes
Set whether the slideshow loops continuously
or stops on the last image.
Duration
Select [Duration] using the buttons, then select the desired number of
seconds by pressing the buttons.
Repeat
Select [Repeat] using the buttons, then select [No] or [Yes] by pressing
the buttons.
Press button to confirm the Slideshow settings or button to close
the confirmation dialog without any change.