Sigma dp3 Quattro - Using the External Flash

87
USING THE EXTERNAL FLASH
This section explains how to use a compact, dedicated, external flashgun.
THE EXTERNAL FLASH
The dp3 Quattro camera is equipped with a hot shoe, allowing the use of
you a compact, dedicated, external flashgun.
ELECTRONIC FLASH EF-140S SA-STTL (sold SEPARATELY)
 This compact design flashgun has a maximum Guide Number of 14
(ISO100 / m).
 The TTL exposure is controlled by the automatic S-TTL system.
 This flash unit uses two “AAA” type Ni-MH batteries allowing it to have a
compact design.
 It is also possible to use the EF-140S SA-STTL in manual mode.
 It can be used with the SD1 Merrill / SD1 / SD15 / SD14 digital SLR
camera and its exposure will be controlled with the S-TTL system.
USING THE EXTERNAL FLASH
1
Turn off the camera and attach the
flashgun by referring to its instruction
manuals.
2
Turn on the camera and set the flashgun
switch to TTL.
3
Make sure that the Flash Mode icon is displayed on the
LCD monitor.