Sigma sd Quattro - DEVELOPING RAW DATA INSIDE THE CAMERA

127
DEVELOPING RAW DATA INSIDE THE CAMERA
It is possible to develop RAW data inside the camera, and create a JPEG
format image.
RAW development setting screen
1
Exposure Compensation (P.84)
2
White Balance (P.69)
3
Image Quality (P.77)
4
Image Size (P.78)
5
Aspect Ratio (P.79)
6
Color Mode ( P. 90)
7
Color Space (P. 97)
8
Tone Control ( P. 96)
9
Icon to start image development
10
Description of selected icon
1
While displaying the RAW image, press the button and open
[ Playback Menu] (P.30), then select [RAW Development].
2
In the sub menu, select the image to develop in RAW format from the
following two methods;
Select Files
Display the picture to develop by pressing the
buttons (when it is displaying 9 pictures over the
screen, the
button will appear instead), and
confirm it with the button.
 It is possible to process [Selecting File] even when
an image is not displayed in Step 1 .
Current File
It displays the image selected at the Step 1 .
 It is not possible to select [Current File
] when
JPEG images are selected at the Step 1 .
 After selecting the image, the message [Now Processing…] will appear
until it displays the RAW development setting screen.