SDS Series
8
• 8 Independent programs with flexible pump assignment
• 12 Programmable field DataNodes™ connect directly to the two-wire cable
• Moisture sensors (up to 4 total)
• Water meters ( up to 8)
• Pause program
• Stop program
• Rain off
• KWH meter (1 only)
• Frost sensors (2 only)
• 7 Direct controller sensor inputs connect to the controller terminal strip
• Analog pressure sensor — High, intermediate and low. Set points and
delays are programmable at controller.
• Tank Level (Requires SDS-100 w/ Ultrasonic Level Sensor)
• Digital water meter
• Low pressure
• Intermediate pressure (skips to next station in program sequence)
• High pressure
• Program start
• Aux Meter
• Programs watering in time, volume (litres) and precipitation (mm).
• Exclusive HydroSector™ for matched precipitation zones.
• Loop program for propagation.
• Run times in Hr : min : secs.
• DataValves™ can be assigned to any station.
• DataNodes™ can be assigned to any program.
• PumpNodes connect anywhere on the two-wire cable to pump-start re-
lays.
• Auxiliary pump for chemical/fertigation program.
• Individual pumps can be assigned for each program.
• 2 independent Frost programs
• Connect online via cellular data (3G / 4G modem req.), Wi-Fi (module
req.) or Ethernet (module req.).
• SignalCloud central control software accessible from
www.signalcloud.com & dedicated tablet app.
• SignalCloud Mobile Smartphone/Tablet App available for download on
Apple’s App Store and Google Play for Android.
Description
• Flexible setup
• Online connectivity
To Next Page
Loading...
Need help?
General