EH-500/600 Installation Manual
Page 3
About this Document
This document is the Installation Manual for the Small-Form-Factor (SFF) EtherHaul-500
and EtherHaul-600 wireless Link.
It provides product overview and details the installation and initial setup.
For instructions how to use the product’s features, refer to the “EtherHaul Operation,
Administration and Maintenance Manual”.
Features and functionality described in this document may be available for specific
product models or starting from specific SW version.
Please review the individual product’s release notes to verify if a specific feature is
supported in the product you use.
Applicable Products and Releases
V-Band
o EH-600T/TX, minimum SW release 7.4.0
o EH-500T/TX, minimum SW release 7.4.0
Audience
This document assumes a working knowledge of wireless backhaul platforms and their
operating environments.
This document is intended for use by all persons who are involved in planni ng, installing,
configuring, and using the EtherHaul system.
Conventions
The following conventions are used in this document in order to make locating, reading,
and using information easier.
Special Attention
Informs you of a helpful optional activity that may be performed at the current
operating stage.
To Next Page
Loading...
