1.3 TECHNICAL DATA
Electricity supply: Machine: 24V d.c.- 5,5 Amp. - 130W
Power pack: 90/264V a.c. - 50/60Hz - 220W MEANWELL GST220A24-R7B
Cutter motor: 24V d.c.
Cutter: in hard metal (carbide) - coated
Tool speed: 1860 rpm
Movement: on 2 axes (with special bushes) driven by step motors (on rectifi ed roller guides).
Clamps: rotating with four sides, used to secure keys perfectly, fi tted either on their backs or
profi les for keys with symmetrical cuts.
Runs: asse X: 30 mm asse Y: 54 mm
Dimensions: width: 318 mm
depth: 413 mm
height: 340 mm
Mass: Kg. 16
Noise level: sound pressure Lp(A) =
-
brass flat keys: 72.0 dB(A)
-
steel flat keys: 74.5 dB(A)
CLASS 1 LASER READER:
• Maximum radiation with safety lock excluded: 230 μW
• Wave length: 790,6 μm (invisible)
• Classed to: EN 60825-1:2014
Copyright Silca 2019
7
To Next Page
Loading...
