Silca POKER PRO - Clamps

4 CLAMPS
Fig. 17 - Clamp CUTTER side Fig. 18 - Clamp OPTICAL READER side
Fig. 19
The 4-sided clamp is used to secure keys fi rmly up against the back and on the profi le.
Place the clamps in position with the most suitable side for the key to be cut.
- Side A: for keys to be fi tted on their backs, keys with double cuts without groove and cruciform keys;
- Side B: for keys placed on their backs and having cuts with a depth of less than 3,9 mm and cruciform keys;
- Side C and D: for keys to be cut on both sides and locked on the groove.
Operating manual POKER PRO
Copyright Silca 2019
13