Silca POKER PRO - Separate Parts; Power Pack and Lead; Fixing Bracket

3.4 SEPARATE PARTS
The machine packing also contains the following components, separately packed:
3.4.1 Power pack and lead
Fig. 9 Fig. 10
Connect POKER PRO to the power pack (W) and connect the latter to the power supply with the power lead
(W2).
W
W2
W1
Fig. 11
3.4.2 Fixing bracket
If the key-cutting machine is transported and used on a vehicle, e.g. a van, it must be prepared as follows:
1) Turn off the machine and detach the power lead.
2) Remove the tablet holder and tablet.
3) Turn the key-cutting machine onto its back.
4) Connect the fi xing bracket to the machine and secure with the 2 screws.
5) Return the machine to its upright position on the work top.
Fig. 12 Fig. 13
Operating manual POKER PRO
Copyright Silca 2019
11