Silca Unocode 399 Plus - 1.4 TECHNICAL DATA

Unocode 399 PLUS Operating manual - English
8 Copyright S ilca 2010
1.4 TECHNICAL DATA
Electricity supply :
230V-50Hz
Nominal power :
230V: 1,1 Amp. 210 Watt
cutter motor :
single phase and speed
cutter :
hard metal
Tool speed :
• 50Hz: 2370 rpm (+/- 10%)
Movement s:
on 2 axes with ball screws activated by step motors, on rectified roller guides.
Possibility to add a 3rd axis to activate the optional tilting and rotating clamps
.
Clamp :
universal 4 sided clamp to grip flat, car and cruciform keys
Runs :
X axis : 57 mm Y axis: : 32 mm
Dimensions :
width : 500 mm depth : 700 mm height : 700 mm ( with raised shield 900 mm)
Mass :
Kg. 51
Noise level :
sound pressure Lp(A) = 80 dB(A) ( cutting iron keys )
77 dB(A) (
cutting brass keys )