VITTORIO VENETO 24/03/2011
CE DECLARATION OF MACHINE COMPLIANCE
SILCA S.p.A. - VIA PODGORA 20 ( Z.I.)
31029 VITTORIO VENETO (TV) - (ITALY)
TEL. 0438 9136 - FAX. 0438 913800
Declares under its own responsibility that the Key-cutting machine model
UNOCODE 399 EVO
complies with the requirements of the following European Directives:
European Union DIRECTIVE 2006/42/CE (Machines)
and with the EN 12100 – 1 / EN 12100 – 2 Standards
European Union DIRECTIVE 2004/108/CE
(Electromagnetic Compatibility)
and with the EN 55022 / EN 55024
EN 61000 – 3 – 2 / EN 61000 – 3 – 3 / EN 62233 : 2008 Standards
European Union DIRECTIVE 2006/95/CE
(Low Voltage) | 08 |
and with the EN 60950 – 1 / EN 60825 – 1 Standards
Claudio Tomasella of the Silca S.p.A. Research & Development Division is authorized
to create a Technical File.
General Manager Basic Production Center
To Next Page
Loading...
