Silent Sentinel Oculus - Using PTZ Preset Tours

–
User manual
from 1 to 60 seconds. You can also reorder of the preset list by selecting a preset in the list and
by clicking the UP or DOWN button on the right side of the preset list to move it up or down.
The changes are applied to the tour when you click on the Save button at the bottom of the web
page.
Note: The position of each preset can be set in the Live Viewer web page of the device.
4.3.2 Using PTZ Preset Tours
Activating a PTZ preset tour is done in the Live Viewer web page of the device. Simply select
the preset tour in the Preset Tours sub-section and press the Start button to start the tour.
If the tour is not configured or is empty, the tour immediately stops without moving the camera.
The tour also automatically stops if the PTZ camera is moved manually by the user. After such
an occurrence, the tour can be restarted by clicking on the Start button again.