Silent Sentinel Oculus - Position Tour Management

Tours
A Position tour is a collection of one or more preset positions that the camera will be instructed to visit in sequential order. Up to
16 tours can be defined and each can contain up to 60 preset positions, placed in any order.
A Mimic tour (4 available) stores a record of the camera's pattern of movements for a period of up to 5 minutes each.
Position Tours
The ‘@’ suffix indicates that the corresponding tour has been programmed. When you select a tour number, you will see an
options screen for that tour:
Run tour – runs the current tour. Menu preset (default Preset-2) to exit a running tour.
Edit/record tour – allows a tour to be edited in a sub-menu - see below.
Erase tour – removes the tour from the camera memory.
To edit / create a Position tour;
1- Enter the Setup menu, choose Tours and then the required Position Tour number (1 - 16).
2- Choose the Edit/record tour option.
3- Choose the Add option to display the list of available positions (‘@’ indicates a preset position is programmed).
4- Highlight and select the required preset. See below for details about adjusting speed and dwell time.
5- Repeat steps 3 and 4 until all of the required presets have been added to the tour.
For each preset within the tour you can adjust the positioning speed and dwell time. To edit a specific step in the tour, highlight
the preset number and select it to see the menu below:
Select tour…
01@ 02@ 03@ 04
05 06 07 08
09 10 11 12
13 14 15@ 16
M1 M2 M3 M4@
Silent Sentinel Oculus
Version n.nnn (xxxx) xx
SN: FFFFFFFF POST: 000000000
Run tour
Edit/record tour
Erase tour
Exit menu
Silent Sentinel Oculus
Version n.nnn (xxxx) xx
SN: FFFFFFFF POST: 000000000
Select preset 1
Speed Med
Dwell (secs) 3
Remove preset
Exit menu