Miscellaneous
>Date and time sets the date and time for the cameras real-time-clock
display.
Debug messages controls the display of additional information on the OSD
which can help to diagnose camera problems.
>Diagnostics displays hardware diagnostic information for factory and
servicing purposes.
Hide quick menu allows you to prevent access to the Quick Menu using
Preset 198.
IR Lamp Auto-on, when set to Auto, allows an optionally fitted LED
illuminator to be switched on automatically in low light conditions. When set
to On or Off the lamp is in a permanent state.
Idle func (tour) selects which tour will be initiated if the idle time-out period
elapses. Selecting Zero disables the function.
Idle timeout sets the wait period from the last operator input until the Idle
function is automatically started.
POST controls whether a power-on-self-test is performed at start-up. If
turned off, some functions will no longer be available.
Return to Off-pos controls the camera behaviour after a power-loss. If this
option is on then the camera will automatically return to the previous
position.
Z-dependent speed enables the pan and tilt speed to be dynamically
adjusted to match the zoom setting of the lens – the camera will pan and tilt
slower when zoomed in and faster when zoomed out.
Focus speed sets the nominal rate of focus movement, (applies to specific
lens versions only).
Change password allows you to alter the six digit password used to protect
the setup menu
Silent Sentinel Oculus
Version n.nnn (xxxx) xx
SN: FFFFFFFF POST: 000000000
>Date and time
Debug messages Off
>Diagnostics
Hide quick menu Off
Idle func (tour) 0
Idle timeout 5
IR Lamp Auto-On Auto
POST On
Return to Off-pos On
Z-dependent speed On .
Focus speed 60
Change password
Exit menu
Presets
Each preset allows you to define a camera pan and tilt position as well
as a zoom setting. You can define up to 128 presets which can then be
either accessed using a Goto command, selected from the Goto Preset
menu or can be linked together within one or more camera tours.
When you choose the Presets option within the menu, the list of presets
will be shown. The ‘@’ suffix indicates that the corresponding preset has
position data stored within it.
Highlight the required preset number and select it to view the available
options:
Store preset saves the current camera pan/tilt/zoom position in the
selected preset.
Erase preset clears the location stored within the selected preset.
.
Edit preset…
001@ 002@ 003@ 004@ 005@
006@ 007@ 008@ 009@ 010@
011@ 012@ 013@ 014@ 015@
016@ 017@ 018@ 019@ 020@
021@ 022@ 023@ 024@ 025@
026@ 027@ 028@ 029@ 030@
031@ 032@ 033@ 034@ 035@
036@ 037@ 038@ 039@ 040@
041@ 042@ 043@ 044@ 045@
Silent Sentinel Oculus
Version n.nnn (xxxx) xx
SN: FFFFFFFF POST: 000000000
Preset 1
Store preset
Erase preset
Exit menu
To Next Page
Loading...
