Silent Sentinel Oculus - Prest Assigned Functions

Joystick
Function
Web-Gui Preset
No.
Preset # Extended Functions
1
0
Fixed 1
Select - when in menus (Preset Position 1 otherwise).
2
1
(Default)
Base Value Fixed 199
Menu
3
2
(Default)
Base+1 Fixed 200
Night Mode
4
3
(Default)
Base+2 Fixed 201
Wiper start
(Do not wipe when window is dry.)
5
4
(Default)
Base+3 Fixed 202
Auxiliary 1
6
5
(Default)
Base+4 Fixed 203
Auxiliary 2
7
6
(Default)
Base+5 Fixed 204
Video Swap
(Only for twin camera models)
8
7
(Default)
Base+6 Fixed 205
Magnifier / (AGC)
Thermal Polarity
9
8
(Default)
Base+7 Fixed 206
Secondary Imager Control [SIC]
(Only for twin camera models)
10
9
(Default)
Base+8 Fixed 207
PAIR Enhancement view – On/Off toggle
(Only applicable to PAIR DSP lenses.)
11
10
(Default )
Base+9 Fixed 208
Wide Dynamic Range – On/Off toggle
(Only applicable to some models)
12
11
(Default)
Base+10 Fixed 209
Auto-focus - (for keyboard without AF key)
( Secondary control [SIC] must be set to correct imager)
13
12
(Default)
Base+11 Fixed 210
Auto-Iris - (for keyboards without AI key)
( Secondary control [SIC] must be set to correct imager)
14
13
(Default)
Base+12
White Light - Lamp On/Off Toggle
(Only applicable to some models)
15
14
(Default)
Base+13
End Mimic Record - Mimic Tour
(Only applicable if recording a tour)
16
15
(Default)
Base+14
ICE On/Off - thermal function On/Off Toggle
(Only for ICE Thermal models)
17
16
(Default)
Base+15
ICE Increase - Thermal function – Level Increase
(Only for ICE Thermal models)
18
17
(Default)
Base+16
ICE Decrease - Thermal function – Level Decrease
(Only for ICE Thermal models)
-
Fixed 197
Boot Screen - Re-enters the boot screen to show protocol and switch
settings
-
Fixed 198
Quick Installation Menu
Annex A – Prest Assigned Functions
When using the Web Browser interface use the WEB-GUI PRESET list values to call functions.
The web-browser GUI provides a drop-down list for accessing Preset functions and positions.
These list values are offset by 1 from the Joystick function values that are used to access serial controlled Oculus/Aeron
cameras.
Please used the Web-Gui list when operating with IP camera system.