Need help?Do you have a question about the Silent Sentinel Oculus and is the answer not in the manual?
Details factory default IP settings and configuration options.
Guide on accessing and logging into the camera's web interface.
Describes the System Status screen and its information display.
Explains controlling camera movement and presets via the Live Viewer.
Details network interface, hostname, MTU, NTP, and HTTP configuration.
Settings for preview, general input, sensor, and video compression.
Steps to configure PTZ preset tours, add/remove presets, and set duration.
Steps to create, edit, and delete email notification rules.
Steps to troubleshoot network discovery and communication issues.
Troubleshooting steps for power issues, including voltage and fuses.
Diagnosing incorrect camera movement due to orientation or limits.
Troubleshooting steps for no video output, checking cables and coax usage.
Troubleshooting issues with protocol, address, and baud rate settings.
General| Weather Resistance | Yes |
|---|---|
| Night Vision | Yes (IR LEDs) |
| Connectivity | Wi-Fi, Ethernet |
| Audio | Built-in microphone |
| Storage | Cloud |
| Camera Type | Dome |
| Ingress Protection | IP66 |
| Video Compression | H.264 |
| Power Supply | 12V DC |
| Motion Detection | Yes |
| Operating Temperature | -20°C to 60°C (-4°F to 140°F) |
To Next Page
