Silent Sentinel Oculus - Main Menu Navigation

●
The main menu
The main menu provides access to all camera configuration features and contains numerous sub-menus within it:
Goto preset – shows a list of the pr esets. Selecting a preset will apply it. Presets that are defined are marked with an ‘@’
symbol.
Run tour – shows a list of the tours and mimic tours. Selecting a tour will run it. The Menu preset (default Preset-2) to exit a
running tour.
Setup (protected) – accesses the setup and configuration menu (see below for details). The setup password will be requested
before access to the menu is allowed. The default setting for the password is AAAAAA (6 characters).
Reboot camera – resets the camera as though it has just been powered on. This is required by some configuration changes
and is also useful if you suspect there may be a camera error as the POST is run.
Setup
The setup menu is protected by a password. The default setting for the password is AAAAAA (6 characters) – this can be
changed within the Miscellaneous section.
Select the highlighted character to add it to the password then select OK to submit it and open the SETUP menu.
The SETUP menu contains sub-menus that allow the settings of the camera operating parameters, preset positions, tours,
telemetry (on-screen display items) and privacy zones.
Camera 1 options – provides access to the module specific options for the optical camera.
Camera 2 options – shown only if a thermal imaging or second video module is fitted.
The Communications, Configuration, Miscellaneous, Presets and Privacy patches options are covered in the sections
below.
Silent Sentinel Oculus
Version n.nnn (xxxx) xx
SN: FFFFFFFF POST: 000000000
>Camera 1 options
>Camera 2 options
Communications
Configuration
Miscellaneous
Presets
Privacy patches
Privacy zones
Telemetry
Tours
Video settings
Exit menu
Silent Sentinel Oculus
Version n.nnn (xxxx) xx
SN: FFFFFFFF POST: 000000000
>Goto preset
>Run tour
>Setup (protected)
Reboot camera
Exit menu