Silex technology SD-300 - Page 70

62
SD-300/SD-320AN User's Manual
Remove the power plug from the outlet and the network cable from SD-320AN.
11.
* If you plan to use SD-320AN in a wired network after completing the conguration, the network cable
does not need to be unplugged
Connect the serial device that you wish to share over the network to SD-320AN using a
serial cable and insert the power plug of SD-320AN into the outlet.
12.
Network conguration is complete.
TIP
Network
EthernetHub
NetworkCableACadaptor
SD-320AN
(3)
(2)
(1)
ACadaptor
SD-320AN
(2)
(1)
SerialCable
TOSerialCable
(3)