01
About Silhouette CAMEO
5
/CAMEO
5
PLUS
12
4
Remove the strips of (blue) tape and cushions (
2
pieces) that hold the Tool Carriage in place.
After removing cushion (
1
), move the Tool Carriage slightly to the left, and remove the remaining
cushion (
2
).
Cushion (
1
)
Cushion (
2
)
Tool Carriage
Note
When manually moving the Tool Carriage, do not hold the
Tool Holder with your hand.
Turn off the power, hold the part shown on the right, and
move it slowly.
Moving it too fast may cause a malfunction.
Tool Carriage
Tool Holder
To Next Page
Loading...
